1 0

    OCTOpod Duo Starter Kit

    OCTOpod Duo Starter Kit

    $998.00
    $998.00
    Sale Sold out
    Tax included. Shipping calculated at checkout.
    Printer
    1 / 8 Pre-Order OCTOpod Duo Starter Kit showing Crown and Arch workflow components together.

    Start with both OCTOpod workflow paths instead of choosing one now and adding the other later.

    Move between restorative and arch-scale workflows on the same compatible printer.

    Reduce the scraping, draining, filtering, cleaning, and setup steps that slow resin workflows down.

    Choose the resin that fits the indication while following manufacturer IFUs and validated settings.

    Duo Starter Kit

    OCTOpod Duo Starter Kit

    Crown + Arch workflows. One modular platform.

    Pre-Order Crown + Arch

    Busywork is not a value-added workflow. Start with dedicated Crown and Arch setups that help your team add same-visit restorations and everyday dental printing with less mess, less handling, and fewer workflow slowdowns.

    Pre-Order
    Duo gives your practice both OCTOpod workflow paths from day one: Crown for small restorative cases and Arch for broader everyday dental printing.
    $1,798 $1,996 Save $198

    Includes the shared OCTOpod platform, Crown workflow components, Arch workflow components, and refill packs for both systems.

    Pre-order open now. Anticipated shipping date: July 1, 2026.

    Choose Printer & Pre-Order¹

    Best for Practices that already know they want both same-visit restorative printing and broader everyday dental printing.
    Pre-order open - anticipated shipping July 1, 2026
    Founder-direct support from the team that designed the system
    Built and shipped in the USA
    Open-resin workflow for compatible 405 nm dental resins
    Accepted payments
    Shop Pay Visa Mastercard Amex PayPal

    Shop Pay Installments - $449.50 x 4 biweekly. No interest, no fees.

    Cleaner workflow

    Busywork is not a value-added workflow.

    Traditional full-vat printing burdens your team with cleanup, waste, and reset time. Duo gives your practice dedicated Crown and Arch workflows, so you can add restorative and appliance printing with less mess, less handling, and fewer slowdowns.

    Traditional full-vat workflow

    Mess. Waste. Cleanup. Every material change adds friction.

    • Reusable vats require more cleaning, create more waste, add more mess, and increase contamination risk.
    • Reusable build plates require scraping, cleaning, and surface prep before the next print.
    • Draining the vat requires pouring, filtering, cleanup, and lost resin.
    • Larger resin surfaces increase odor, exposure, and material degradation.
    • Small jobs can waste more resin than they use.

    Optimized for restorative dentistry. Designed for simplicity.

    • Ultra-low-volume Crown Vats hold only the resin your print needs.
    • Disposable vats and build plates mean: Print. Remove. Toss. Next case.
    • Purpose-built for small restorative prints: crowns, inlays, onlays, bridges, temporaries, and more.
    • Same-visit restorative workflow: print, post-process, and seat in as little as 30 minutes.²
    What's included

    Both OCTOpod workflow paths in one starter kit.

    Duo combines the shared OCTOpod platform with Crown and Arch components, giving your practice both small restorative and broader everyday dental workflows from day one.¹

    Shared platform

    The frame, Z-mount, alignment, and setup hardware for your compatible printer.

    Crown workflow

    Small-format vats, plates, and setup components for same-visit restorative printing.

    Arch workflow

    Open and Full Arch components for models, guards, splints, trays, guides, and appliances.

    Refills + resources

    Crown and Arch refill packs, plus setup guidance, protocols, and support.

    Core platform components
    • OCTOpod frame components
    • OCTOpod Z-Mount
    • Alignment components
    • Shared setup hardware
    Crown workflow components
    • Crown Vat system
    • Crown Plate / Quad-Hub components
    • Crown workflow setup components
    • Crown Refill Pack included
    • Disposable Crown Vat cartridges
    • Crown Plates
    • Crown resin syringes, if included
    Arch workflow components
    • Arch Vat system
    • Open Arch workflow components
    • Full Arch workflow components
    • Open Arch Refill included
    • Full Arch Refill included
    • Arch Vat components
    • Disposable open arch build plates
    • Disposable full arch build plates
    • Arch resin syringes, if included
    Resources + support
    • Resources hub access
    • Printing Protocol
    • Instructions for Use
    • Quick Start Guide
    • Video walkthroughs
    • Recommended resin settings
    • Printer template masks
    • Founder-direct support
    Crown + Arch applications

    Two workflow paths for the jobs your practice keeps needing.

    Use Crown when the case is small and restorative. Use Arch when the part needs more room. Duo gives you both workflows from day one.

    Same-visit restorations

    Crowns, inlays, onlays, small bridges, temporaries, and chairside restorative workflows.

    Models & planning

    Diagnostic models, aligner models, orthodontic models, implant planning models, and burnout models.

    Guards, trays & retainers

    Nightguards, splints, sportguards, bleaching trays, retainers, and appliance workflows.

    Guides & denture workflows

    Surgical guides, IBT trays, impression trays, denture bases, denture teeth, try-ins, and gingival masks.

    Open-resin workflow

    Let the indication drive the resin.

    OCTOpod is designed around compatible 405 nm dental resins, so your material choice can follow the part you are printing instead of the hardware.³

    For Crown workflows

    Use restorative resins appropriate for crowns, inlays, onlays, and other same-visit restorative cases.

    For Arch workflows

    Use model, splint, guide, tray, denture, or appliance resins appropriate for the part being produced.

    Printer compatibility

    Choose the version that matches your printer.

    OCTOpod Duo Starter Kit is configured for compatible desktop MSLA printers¹. Select the version that matches your printer before checkout.

    Recommended

    Elegoo Mars 4 Ultra

    • Recommended for first-time and experienced OCTOpod users
    • 18 µm XY resolution
    • WiFi transfer
    • Print restorations in as little as 7 minutes and arch models in as little as 12 minutes.²
    Supported

    Phrozen Sonic Mini 8KS

    • Available for practices already using this printer
    • 22 µm XY resolution
    • USB transfer
    • Print restorations in as little as 21 minutes and arch models in as little as 45 minutes.²
    Included with your purchase

    The OCTOpod Resources hub

    Duo customers get access to setup guidance, protocols, troubleshooting, recommended settings, and support resources.

    Printing Protocol Instructions for Use Quick Start Guide Recommended resin settings Failed-print troubleshooting CDT codes & reimbursement Video walkthroughs Printer template masks Founder-direct support
    Browse Resources →
    FAQ

    Questions practices ask before they commit to both workflows.

    Duo is for teams that already expect to use both workflows, but printer choice, refill planning, and resin selection still matter.

    Choose Crown if your main goal is same-visit restorative printing. Choose Arch if your main goal is models, guards, splints, trays, guides, retainers, or appliance workflows. Choose Duo if you already know your practice wants both workflows from day one.

    Duo gives you both Crown and Arch workflow paths upfront without paying twice for the shared platform components. It is the better fit if you expect to use both restorative and arch-scale workflows.

    No. The Duo Starter Kit includes OCTOpod components for a compatible printer. The printer, resin, wash/cure equipment, PPE, and standard resin-handling supplies are sold separately.

    Yes. Crown and Arch are built around the same modular OCTOpod platform for compatible printers. Each workflow uses different vat and build plate components.

    The system is designed so practices can swap workflow-specific OCTOpod modules instead of dedicating a separate printer to each workflow. Follow the OCTOpod setup guidance when changing configurations.

    Crown workflows use Crown refill components. Arch workflows use Open Arch and/or Full Arch refill components depending on the parts you print. The Duo Starter Kit includes refill packs for both workflows to help you get started.

    No. OCTOpod is designed as an open-resin workflow for compatible 405 nm dental resins. Choose the resin appropriate for the indication and follow the resin manufacturer's IFU.

    The OCTOpod Duo Starter Kit is available for pre-order. Anticipated shipping date: July 1, 2026.

    Footnotes

    ¹ Printer, resin, wash/cure equipment, PPE, and standard resin-handling supplies are sold separately. Use all equipment and materials according to the manufacturer's documentation and procedures.

    ² Print-to-seat and print-time estimates depend on printer, resin, part geometry, layer height, validated print settings, wash/cure protocol, finishing requirements, and clinical verification. "As little as" timing reflects optimized OCTOpod workflows and does not guarantee all cases will meet those timings.

    ³ Always follow the resin manufacturer's IFU and validated print, wash, cure, and finishing protocols.

    Next step

    Start with both OCTOpod workflow paths.

    Duo gives your practice Crown and Arch workflows from day one: same-visit restorative printing and broader everyday dental printing on one modular system.

    Explore OCTOpod Crown Explore OCTOpod Arch
    View full details